|Place of Origin:||CHINA|
|Minimum Order Quantity:||Negotiation|
|Packaging Details:||Metal drum package. 20L/drum from 25-30kg.|
|Delivery Time:||10-15 DAYS|
|Supply Ability:||300 MT MONTH|
|Material:||Silicone Waterproofing||Application:||Outdoor Wall Interior Wall|
|Place Of Origin:||China||Customization:||Acceptable|
|Usage:||Building Coating||Application Me:||Thod: Brush|
elastomeric waterproofing coating,
silicone based roof coating
Silicon Waterproof Coating
It is environmentally friendly water-based waterproof coating based on silicone breast and nano-composite emulsion, mixed an inorganic filler and various additives . This product is an aqueous single-component waterproof coating, which formed Waterproof layer has strong cracking and impermeability capacity, effect waterproof and long service life. It is specifically for the higher degree of waterproofing waterproof coating layer of the skin and the grassroots, to enhance water penetration resistance and anti-aging properties.
The waterproof coating is non-toxic, tasteless, acid proof and alkali proof , oil proof, convenient construction, and environmentally friendly polymer waterproof materials.
|1||Exterior||Pink,Grey and other color|
|3||Soluble content g/m2||>65%|
|4||Surface drying time||<45min|
|11||Akali-resistant||Saturation Ca(OH)2 &0.1%NaOH,15℃ 15days,no bulking,no falling off|
|12||Heat resistance||100℃,6 hours,no slipping, no flowing, no dripping|
This product can be used for waterproofing damp primary treatment conjunctioned with other waterproof materials, it can also be used alone as a waterproof layer.
Flat, stand, cant roof of building, lavatory bath room, swimming pool, gutter and afforest roof. Underground construction: concrete floor, beam, shear wall, retaining wall, elevator shaft, etc. Subway, tunnel, ditch, underground structure, all kinds of pools.
It can be coated according to shape, without omission.
Basic requirements: The base must be clean, smooth, no sand, no loose.
Solidify12-24h later for the first time,
you can take the second brush, the direction of brushing should be vertical with the first time.For third time, if you need the rigid course, to enhance the adhesion stress, you can spread clean fine sand on the surface before the film completely solidify. And when the film with sand solidify completely, you can construct for protective layer.
Additional waterproofing layer: internal and external corners,tube root,crack etc. According to engineering demands, brush for once is also ok, protective layer construction can be taken after completely solidification.
Before the film is not solidified mustn’t get wet in the rain and forbidden to walking or other
Stir evenly before normal use, it will not affect the quality.
Contact Person: silicone