|Place of Origin:||CHINA|
|Minimum Order Quantity:||Negotiation|
|Packaging Details:||25 or 200, 1000 kg in plastic drum|
|Delivery Time:||10-15 DAYS|
|Supply Ability:||800 MT MONTH|
|CAS NO:||4253-34-3||Appearance:||Colorless Pale Yellow Clear Liquid|
|Class:||Crosslinking Agent Series||EINECS No:||224-221-9|
|Purity:||99%||Other Names:||Methylsilanetriyl Triacetate; Triacetoxy(methyl)silane|
methyl ethyl ketoxime msds,
cross linked polymer
Empirical formula: C7H12O6Si/ C8H14O6Si
Molecular weight: 220.3/234.3
CAS No.: MTAS: 4253-34-3
Mixed acetoxycrosslinker (ETA/MTA=30/70)
D-18 is a clear to yellowish liquid with acrid odor of acetic acid (vinegar).
|Appearance||clear to yellowish transparent liquid|
|Density at 25℃||1.15 g/ml|
|Boiling point at 760mmHg||＞210℃|
|Refractive index (25℃)||1.4065|
D-18 soluble in acetic anhydride, treat water will crosslinking, and produce acetic acid.
Application and performance
D-18 is transported from the production site as the parent silane to formulators. Generally, D-18 is used as a cross-linker at 3% to 5%. As D-18 is compounded into a consumer or industrial sealant or adhesive, it reacts with the silicone. After curing the parent silane becomes cross-linked into the silicone rubber matrix and no longer exists, this greatly reduces the potential for consumer or worker exposure.
D-18 is often the main crosslinker of choice for silicone sealants and can be used by itself or in combination with other acetoxysilane to provide the sealant with targeted properties (such as desired cure rate, adhesion, etc).
Product safety, handling and storage
Customers considering the use of this product should review the latest Material Safety Data Sheet and label for product safety information, handling instructions, personal protective equipment if necessary, and any special storage condition required. The “Best use before end” date of each batch is shown on the
product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Contact Person: silicone